Condensate accumulates when conditioning gas in gas conditioning. It always accumulates when cooling moist sample gas. On one hand this may occur inadvertently if thermal bridges occur in the sample gas lines. On the other hand the deposit of moisture is necessary to protect the measuring cells in the analyser from damage and/ or stabilise measurements. Since the sample gas is often conveyed through the analysis system with suction, the condensate must be pumped off to remove it. So-called peristaltic pumps are particularly suited for this purpose. They systemically protect the sample gas system from external air and based on the hose material used offer high resistance against the often times highly corrosive condensate. Many applications require equipment which can be used in explosive areas. This is where the CPsingle X1 and CPdouble X1 with flame-proof synchronous geared motors solutions for zone 1. The CPsingle X1 and CPdouble X1 pump series were developed specifically for these severe operating conditions.