Login / Sign In
by AXIS
Z-SG / Z-SG2 are strain gauge load cell converters. The measurement, carried out with 4 or 6-wire technique, is available via ModBUS RTU serial protocol or analog output. The communication is configurable via DIP-switch or via software by connecting to the device with the Micro USB port on the front panel. Z-SG and Z-SG2 are galvanically isolated 3-way modules up to 1500 Vac. The load cell sensitivity varies from 1 to 64 mV/V. The instruments are configurable via DIP-switch and software (EASY SETUP).
Categories: Automation & IOT, Seneca | Automation Interface, RTUs
Programmable functions via DIP switches or software: full scale, threshold exceeding, stable weighing Advanced functions (Z-SG2): configurable resolution, adjustable sampling rate from 5.4 Hz to 1365.3 Hz, adjustable threshold alarm, stabilized measurement by noise filter, “piece counter” function, automatic tare reset.
|
Power supply |
: 10-40 Vdc / 19-28 Vac |
|
Power Consumption |
: 1,5 W @ 24Vdc (typical); Max 2 W (max) |
|
Isolation |
: 1.5 kVac |
|
Dimension |
: 17,5 x 102,5 x 111 mm |
|
Protection degree |
: IP20 |
