• Sampling frequency settable from 12,53 Hz to 151,71 Hz.
• 1500 VAC isolation amongst inputs, power supply and CAN interface.
• Protection against ESD discharge up to 4 kV.
• Adjustable rejection at 50 and 60Hz.
• Strain gauge directly powered by the instrument.
• Ratiometric measurement.
• Simplified power supply and serial bus wiring by means of the bus housed in the DIN rail.
• 1 to 64mV/V sensitivity, settable by software for real/integer values.

• Load cell calibration with known weight
• Load cell calibration is not necessary if the load cell sensibility is known.
• Configurable digital I/O.
• Stable weight indication via digital output / Modbus register / PDO
• Remote writing of the tare in volatile and/or non volatile memory through digital input / CAN commands.
• Led Indications: Power Supply, CAN communication, MODBUS-RTU communication, Inputs fault.
• Alarm generated when programmable threshold is exceeded.
• Measurement stabilization through a programmable number of samples, ±30000 points hysteresis activable.

Power supply : 10-40 Vdc / 19-28 Vac

Power Consumption :  2 W

Power Transducers : 5 Vdc , up to 4/8 load cells

Isolation : 1.5 kVac (6 way)

Input protection :  Against ESD discharge up to 4KV

Response Time : < 7 ms

A/D Resolution : 24 bit