Z-4TC 4-CH Thermocouple /MV Input Module / RS485 Modbus RTU
The Z-4TC module acquires up to 4 single-ended signals (voltage-type, from the: signal generator or thermocouple) and it converts them to a digital format using the Modbus RTU Protocol. A double serial interface (RS232 or RS485) it’s also available (Modbus RTU protocol).
Categories:
Automation & IOT, Seneca | Automation Interface, RTUs
Download PDF
- Internal Cold Junction compensation
- Easy configurable by free configuration software ”Easy Setup”
- RS485 serial communication with MODBUS-RTU protocol, maximum 32 nodes.
- RS232 serial communication with Modbus RTU protocol for registers access and configuration
- Measuring mode Thermocouples or Voltage
- Configuration of a filter applied to each input signal
- Possibility to disable the automatic detection of thermocouple interruptions (to decrease the measure error of the acquired signals from the thermocouples)
- Possibility to add/remove the module to/from RS485-bus without disconnecting the communication or power supply
- Easy-wiring of power supply and serial bus by means of the bus housed in the DIN rail.
| Output Number |
: 4 |
| Resolution |
: 16 bits (15+1 sign) |
| Configurable between |
: 0(no filter is applied), from 1(min) to 6(max) Accuracy |
| Initial |
: 0.1% of E.E.S.(Electrical End Scale) |
View more products
