8-CH NTC Module With Modbus RTU Protocol Z-8NTC
The Z-8NTC is an 8 channels NTC temperature converter with Modbus RTU protocol.
For the communication can be used the USB or the RS485 port.
The device can measure up to 8 NTC (each channel can be individually configured).
The powerful Easy Setup software can be used for obtain the NTC parameters in a simple way.
Categories:
Automation & IOT, Seneca | Automation Interface, RTUs
Download PDF
- 16-bit A/D conversion on three adjustable scales 100 Ω – 10 kΩ, 1 kΩ –100 kΩ, 5 kΩ – 500 kΩ.
- 0.5% accuracy on resistance value.
- Measurement available in the following types: Resistance (Ω) or Temperature (°C, °F, K) on Integer 32-bit and Floating point 32-bit, direct or swapped.
- Conversion From temperature to resistance with Steinhart-Hart high equation for high accuracy
- Each channel can be individually enabled and configured.
- Programmable filter for reading stabilization.
- Conversion time: 500 ms for all channels
- Linearization through configuration software for sensors: NTC, COSTER, KTY with Beta or Measure Points
- Easy power supply and serial bus wiring by means of the Seneca Z-BUS housed in the DIN rail.
- Removable screw terminals for section Max. 2.5 mm cable.
| Power supply |
: 10 – 40 Vdc 19 – 28 Vac 50 – 60 Hz |
| NTC Inputs |
: Generic NTC with user-definable curve |
| Measurement range |
: 1k resistance, Range from 100Ω to 10kΩ. |
| Dimension |
: 17,5 x 102,5 x 111 mm |
View more products
